TJ730HD - (400 VAC)

Manufacturer		HYUNDAI
Model		DP222LB
Cylinder Configuration		V TYPE
No of Cylinders		12
Displacement	lt	21,9
Bore	mm	128
Stroke	mm	142
Compression Ratio		15:01
Aspiration		TURBOCHARGE-INTERCOOLER
Governor Type		ELECTRONIC
Cooling System		WATER
Coolant Capacity	lt	114
Lubrication Oil Capacity	lt	40
Electrical System	VDC	24
Speed / Frequency 50 Hz	rpm	1500 rpm / 50 Hz
Engine Gross Power (Standby 50 Hz)	kW	664
Fuel Consumption %110 ESP 50 Hz	lt/h	162,7
Fuel Consumption %100 PRP 50 Hz	lt/h	147,1
Fuel Consumption %75 PRP 50 Hz	lt/h	109,2
Fuel Consumption %50 PRP 50 Hz	lt/h	73
Exhaust Outlet Temperature 50 Hz	°C	496
Exhaust Gas Flow 50 Hz	m3/min	120
Combustion Air Flow 50 Hz	m3/min	42,5
Cooling Air Flow 50 Hz	m3/min	860

No of Phases		3
Power Factor		0,8
No of Bearings		SINGLE
No of Poles		4
No of Leads		6-12
Insulation Class		H-F
Degree of Protection		IP 23
Excitation System		AVR (Automatic Voltage Regulator), Brushless

Canopy Features

TEKSAN Standard Canopies' default features are as follows;

• Compatible with 2000/14/EC directives, certified noise emission level,
• 2 or 4 points transport possibility according to cabin size,
• Hidden exhaust inside the canopy,
• Emergency stop button located on the canopy,
• Improved air suction channel to ensure homogenous cooling in the canopy,
• Radiator air outlet and exhaust with designed towards above,
• Lid on cab that provides to be filled up water and antifreeze easily to the radiator,
• Amplified paint system against corrosion and rust,
• Improved performance in terms of sound insulation,
• Demounted parts that make transportation and maintenance easier,

As well as the standard range of canopies, TEKSAN can also design tailormade canopies with specific sound level or size upon customer requests.

Optional Equipments

Some Optional Equipments that Teksan provides with Generator Sets;

• Medium voltage alternator,
• Remote radiator applications,
• Automatic fuel filling system,
• Fuel tank, oil pan, dashboard, alternator, coil heaters,
• Alternator with double AVR and PMG,
• Synchronization systems,
• The generator output breaker,
• Grid-generator transfer switches,
• Accordance with the specific volume of demand-insulated cabins,
• Seismic solutions,
• Trailer,
• Remote monitoring.

Control Panel Features: TJ 509-T MK3

TJ-509-T MK3 is a next generation genset controller combining multi-functionality and wide communication capabilities together with a reliable and low-cost design. The same controller provides synchronization, load share, AMF, ATS, Remote Start, Engine Control and Remote Display Panel functionalities. The module comes ready for remote monitoring over GSM or Ethernet with plug-in communication modules. Various plug-in modules provide unlimited expansion capabilities allowing to meet any special requirement. The unit complies and mostly exceeds world’s tightest safety, vibration and environmental standards for the industrial category. Software features are complete with easy firmware upgrade process through USB port. The Windows based PC software allows monitoring and programming through USB, RS-485, Ethernet and GPRS. The Rainbow Scada web monitoring service allows monitoring and control of an unlimited number of gensets through any web browser.

Functions

• Multi genset synchronizer and load share*
• Multi genset mains synchronizer*
• Single genset parallel with mains*
• AMF unit with uninterrupted transfer
• ATS unit with uninterrupted transfer
• Remote start controller
• Manual start controller
• Engine controller
• Remote display & control unit
• Waveform display of V&I
• Harmonic analysis of V&I

Communications

Topologies

• 3 phases 4 wires, star
• 3 phases 4 wires, delta
• 3 phases 3 wires, delta, 3 CTs
• 3 phases 3 wires, delta, 2 CTs (L1-L2)
• 3 phases 3 wires, delta,2 CTs (L1-L3)
• 2 phases 3 wires, L1-L2
• 2 phases 3 wires, L1-L3
• 1 phase 2 wires